there are products available at computer stores, but they mostly are composed of alcohol and other agents, you can safely use Windex and a soft clothes to wipe the screen depending if its glossy or matt, be careful to not scratch the surface with a hard or coarse clothe. spray on the cloth and then wipe, if there are sticky smudge then try to get more windex on it but becaureful you dont get any inside the screen bezel.
1. Suggest a mobile with bluetooth and big display screen?
I prefer the itouch from apple.But the stereo sucks.Anyway the effects are cool too.You should have one
2. Why is my monitor display screen too wide?
Since you did not post what OS you are using, here are the instructions for windows XP. I think is similar for Vista and 7. First right-click on the desktop and then left click on Properties from the menu that appears. click on the settings tab at the top right of the box. Slide bar to change resolution. I think it's under personalize on Vista and 7.
3. Where can I get a display screen with 30 Hz or less refresh rate? [closed]
The information you are referring to is outdated. Flickering, banding, and other artifacts caused by refresh rate issues is primarily seen on CRT monitors -- LCDs are largely unaffected.If you want to reproduce this issue intentionally for the purposes of an experiment, you will probably need to find an old CRT monitor. The effects created by a monitor of this type cannot be reproduced accurately on an LCD
4. My iMacs Display Screen Fell down
You have two distinct problems with your iMac that you are unfortunately conflating with the most obvious damage - the broken display. The display is most likely broken and will need to be replaced. I can be tested, but not in a typical home or office environment. The cable connectors on the logic board may be damaged as a fall like that will literally rip them off the board. A visual inspection should be enough to verify if they are good or notThe fan spin is likely because you replaced your hard disk with a non-Apple one that does not have a temp sensor. A missing sensor will cause the fans to spin at full speedThe slow performance is likely due to the erroneous temp readings (from the missing sensor) and the Mac thermal throttling in response. To fix the fan and speed issue, you simply need an inline temp sensor to send the correct data to the SMC. However, the screen is quite expensive and you should get a quote on a replacement prior to doing this - it may be much more cost effective purchase a replacement iMac of the same vintage and sell that one for "parts."Also, if you are going to replace a HDD and go through all the trouble on an iMac, you should spring for an SSD. The performance gains are well worth it
5. My 1st generation iPod display screen is partially blank. Why?
Try resetting it be shifting the hold button back and forth once and then holding the center and play button
6. Why do people have to literally poke the display screen with their oily finger, can't they just glide over without touching it?
I tried and it does not appear that way, no. The touch screen does not respond to gliding your finger near the screen, you have to touch it.Unless you are referring to a non-touch screen phone or computer where someone is just pointing and then touches the screen. I imagine that's because they misjudged the distance, or because they did not realize how oily their skin is
7. Maytag Gemini Oven, the LOC on the bottom oven is on and the display screen shows F9-5, a?
Maytag Oven F9
8. Where do I find a camera I can connect to a PC/Mac to display the screen of a cell phone?
There is currently no adaptor on the market that can instigate your cell format through and into your Mac. It would take alot more than an adaptor to do such a thing. Yes you can go from your Digital camera to your Mac. But you can not go from your cell to your digital camera