Working Principle of Gas Solenoid Valve_ Function of Gas Solenoid Valve

Gas solenoid valve, also known as gas emergency shut-off valve, is an actuator suitable for two position on-off switching and automatic temperature control for heating combustion medium pipeline of urban gas, liquefied petroleum gas, natural gas and other gases. It is widely used in gas heat setting in textile industry and printing industry, furnace heating in glass and bulb industry and gas heating automatic control system in other industries.

Working principle of gas solenoid valve

Direct acting gas solenoid valve is the same as ordinary solenoid valve. When the solenoid coil is powered on, the electromagnetic force lifts the seal from the valve seat, and the valve will open. When the solenoid valve coil is powered off, the electromagnetic force disappears, and the seal will return to its original position.

When the pilot type gas solenoid valve is powered on, the pressure in the upper chamber drops rapidly, the upper low and high pressure difference is formed around the closure, the fluid pressure pushes the closure upward, and the valve opens; In case of power failure, the spring force closes the pilot hole, the inlet pressure forms a pressure difference between lower and upper around the valve closing part through the bypass hole chamber, and the fluid pressure pushes the closing part to move downward to close the valve.

When the normal ventilation solenoid head of the urban gas solenoid valve is energized, the valve rod will be locked by the solenoid head, and the valve is open at this time. When the gas pipeline or gas equipment leaks and the mixed concentration of gas and air reaches 25% of the lower limit of explosion limit, the detector sends a signal to the controller. The controller sends an audible and visual alarm and starts the exhaust fan. At the same time, cut off the current 220V solenoid head to control the voltage and drive the electromagnet to release the valve rod of the safety valve. The valve rod falls rapidly under the action of spring and self weight, Close the valve port and cut off the air supply. After power failure, the shut-off valve cannot be opened manually due to self-locking.

After the distributed direct acting gas solenoid valve is energized, the electromagnetic force directly lifts the pilot small valve and the main valve closure up in turn, and the valve opens. When the inlet and outlet reach the starting pressure difference, after power on, the electromagnetic force pilot small valve, the pressure in the lower chamber of the main valve increases and the pressure in the upper chamber decreases, so as to push the main valve upward by using the pressure difference; In case of power failure, the pilot valve uses the spring force or medium pressure to push the closure and move downward to close the valve.

Function of gas solenoid valve

Gas solenoid valve is a safety emergency cut-off device for gas pipeline. It can be connected with gas leakage alarm system or fire fighting and other intelligent alarm control terminal modules to realize on-site or remote automatic / manual emergency cut-off of gas source and ensure gas safety. When harmful strong vibration occurs, the valve will close automatically. The valve must be opened manually through manual intervention, which meets the safety management specifications and accident handling characteristics

Working Principle of Gas Solenoid Valve_ Function of Gas Solenoid Valve 1

GET IN TOUCH WITH Us
recommended articles
FAQ
What Is the Best Case to Protect My Display Screen on My Droid?
What Is the Best Case to Protect My Display Screen on My Droid?
The Otterbox Defender for the Incredible 2 will be the most durable case for a variety of reasons. -It has a built-in screen protector so your screen has an extra layer of protection from not only scratches but the impact of drops as well. -The shell is made of a polycarbonate plastic that is extremely strong, durable, and lightweight. -It has an extra layer of silicon molded around the outside for extra impact protection. I've had several people tell me they've ran their otterbox over with a car and the phone was still okay. I've also had a firefighter tell me he ran his over with a firetruck and it still survived. Those things are heavy! Finally, I had someone who ran theirs over with a crane and they claimed the phone still functioned despite the screen breaking and otter case breaking. So basically a crane may be the limit. Also, the Otterbox case comes with a one year manufacturor's warranty. Go to Otterbox.com to order one! The commuter series is good too but it wo not be as protective as the defender series. Regards1. Computer wont display on screen after new power supply?if is is a graphic card try re-seating it2. hp pavilion dv6 display screen all disorted colors. so bad cant tell whats showing on screen.when starting up?I have had nothing but problems with HP pavilions. So bad I had to fight to get my money back. I had this same problem with my first one. I sent it for repair 8 times in one year no joke. I never had it with me the whole year cos it was always in repair. :/ You may be another unlucky one who is having problems with Hp laptop.3. when i open task manager a massage display on screen is "SAM-SORRY" and the task manager get closed. plz help!Another quality answer, not using cut and paste. Your poor computer is completely infested with a dread and deadly virus which may one day mutate and infect a human being unless you get rid of it. You will have to take your computer outside, smash it to pieces with a hammer, spread an inflammable liquid on the remains, burn it, then when it's cooled, spread the ashes far and wide on a large body of water. It's all your fault that the rest of us have been put at risk - you must never never never go to porn sites again.4. How much cost to repair Realme 5 display screen in India?The cost to repair your Realme 5 screen totally depends on which method you choose to fix it up. Few of the methods are like getting it fixed from authorized Realme service center or getting it fixed by a local repair shop in your area or to do it yourself. * The 1st option is to go to authorized Realme service center. They will charge a hefty amount on the same, but this will ensure 100% genuine replacement screen with warranty. Means this is the only method to ensure that you will get 100% genuine original screen and will get some limited time warranty on the part. * The 2nd option is to go to some local mobile repair shop in your area, where you can get your Realme 5 repaired for a better price deal but this wo not ensure good quality part and an unreliable warranty. Just make sure that you do not get fooled by a shop who claims to have a original screen for a higher price. Do you really think he can have tie ups with Realme and get original genuine parts from them? The only way these shops can have a original screen is if they took out the screen from some other phone. Do It Yourself * The 3rd and the best option is to get a high quality replacement LCD Screen with Touch Digitizer for your Realme 5 from a reliable online store (like maxbhi.com) and get it fitted from the local repair shop for just 200-300 Rs. This way you will get a good quality display screen with good prices and a reliable warranty. You can even try to do this yourself with the help of youtube videos and phone opening toolkit for Realme 5. As per our research, Realme 5 screen replacement should cost something around 2300 Rupees in India.
Explanation of Common Terms of LED Display Screen
Explanation of Common Terms of LED Display Screen
1. LED brightnessThe brightness of LED is generally expressed by luminous intensity, and the unit is candela CD; 1000ucd (micro candela) = 1 MCD (millicandela), 1000mcd = 1 CD. The light intensity of a single LED for indoor use is generally 500ucd-50 MCD, while the light intensity of a single LED for outdoor use is generally 100 mcd-1000 MCD, or even more than 1000 MCD.2. LED pixel moduleThe LEDs are arranged into a matrix or pen segment and prefabricated into standard size modules. 8 * 8 pixel module and 8-character 7-segment digital module are commonly used for indoor display screen. The outdoor display pixel module has 4 * 4, 8 * 8, 8 * 16 pixels and other specifications. The pixel module for outdoor display screen is also called collecting tube bundle module because each pixel is composed of more than two LED tube bundles.3. Pixel and pixel diameterEach LED light emitting unit (point) in the LED display screen that can be individually controlled is called a pixel (or pixel). Pixel diameter refers to the diameter of each pixel, in millimeters. For indoor display screen, generally one is a single LED with a circular shape. There are 3.0, 3.75, 5.0, 8.0 and so on, among which 3.75 and 5.0 are the most common. In the outdoor environment, in order to improve the brightness and increase the sight distance, one pixel contains more than two cluster LEDs; Since more than two cluster LEDs are generally not circular, the pixel diameter of solid outdoor display screen is generally expressed by the average distance between two pixels: 10, 11.5, 16, 22, 25.4. Point spacing, pixel density and information capacityCenter distance or dot pitch of two pixels of LED display screen; The number of pixels per unit area is called pixel density; The amount of display content per unit area is called information capacity. The essence of the three is to describe the same concept: the point spacing reflects the pixel density from the distance between two pixels, and the point spacing and pixel density are the physical properties of the display screen; Information capacity is the unit of information carrying capacity of pixel density. The smaller the point spacing, the higher the pixel density, the more information capacity, and the closer the distance suitable for viewing. The larger the point spacing, the lower the pixel density, the less the information capacity, and the farther the distance suitable for viewing.5. ResolutionThe number of rows and rows of LED display pixels is called the resolution of LED display. Resolution is the total number of pixels of a display screen, which determines the information capacity of a display screen.6. LED panelThe LED pixel modules are assembled and arranged into a matrix according to the actual size, and equipped with special display driving circuit, DC regulated power supply, software, frame and external decoration to form an LED display screen.7. GrayscaleGrayscale refers to the degree of light and shade change of pixels. The grayscale of a primary color generally has 8 levels to 1024 levels. For example, if the gray level of each primary color is 256, the display color of the dual primary color screen is 256 256 = 64K color, also known as 256 color display screen.8. BicolorNowadays, most color LED displays are dual primary color screens, that is, each pixel has two LED tube cores: one is red tube core and the other is green tube core. When the red light tube core is on, the pixel is red, when the green light tube core is on, the pixel is green, and when the red and green tube cores are on at the same time, the pixel is yellow. Red and green are called primary colors.9. Full colorRed green double primary color plus blue primary color, three primary colors constitute full color. Because the blue tube and pure green tube core constituting full-color are more expensive, there are relatively few full-color screens at present.
As for the Size of LED Display Screen, Can It Be Enlarged at Will
As for the Size of LED Display Screen, Can It Be Enlarged at Will
prefaceThe LED display box has self-determined size, high structural strength, good flatness and easy splicing. Generally speaking, the size of Maipu Guangcai LED electronic screen will not be limited. So, can the size of LED electronic display really be enlarged at will? In fact, it can not be tolerated. We can explain it from the following aspects.01. Price and cost of LED displayAs for the price of electronic screen, the price of LED screen was maintained at 351 square meters several years ago. With the more extensive use in the past two years, the price is now almost maintained at 7000 or 8000 per square meter. Of course, this includes its steel structure, accessories, control card, computer, and so on! Generally speaking, it can be infinitely enlarged, but because of this price, most users can't afford it.02. Visual viewing effectThe farther the display is viewed, the larger the screen must be. Similarly, the closer the viewing distance, the smaller the screen must be. For example: our common indoor LED display screen, under normal circumstances, the viewing distance is a few meters. If it is far, it is at most 20 or 30 meters. Therefore, the area of indoor screen will not be too large, and most of them will be kept within 60 square meters. For the LED outdoor display screen, the viewing distance will be relatively far, generally from more than ten meters, so the area of Maipu brilliant display screen will be relatively large, usually within 10-100 square meters.03. Installation location and environmentThere is no doubt that the indoor environmental space location is relatively limited. For those outside the room, if there is not enough space and position to support, any screen of the display screen will be subject to relatively large nature, so the screen can be enlarged at will here.04. After sales serviceOf course, there is also a major problem that can not be ignored, that is, when the Maipu brilliant LED electronic display is enlarged at will, the after-sales service will become more and more difficult. Once a problem occurs, the relevant maintenance and troubleshooting is quite troublesome, which is a huge test in terms of manpower, money and time.fqj
How Can the Heat Dissipation of LED Display Screen Be Improved
How Can the Heat Dissipation of LED Display Screen Be Improved
In practical application, improving the heat dissipation of LED display screen can not only effectively improve the efficiency of heat dissipation of LED display screen, but also save power, which is more conducive to improving the service life of LED display screen.1. It is a common method to use a long-life and high-efficiency fan to strengthen heat dissipation inside the lamp shell. This method has low cost and good effect.2. Aluminum cooling fins are the most common way of heat dissipation. Aluminum cooling fins are used as part of the shell to increase the heat dissipation area.3. Aerodynamics, using the shape of the lamp shell to produce convective air, which is the lowest cost method to strengthen heat dissipation.4. Surface radiation heat dissipation treatment: the surface of the lamp shell is treated with radiation heat dissipation. The simpler thing is to apply radiation heat dissipation paint, which can bring the heat away from the surface of the lamp shell by radiation.5. Integration of heat conduction and heat dissipation -- the application of high heat conduction ceramics. The purpose of heat dissipation of lamp shell is to reduce the working temperature of LED HD display chip. Because the expansion coefficient of LED chip is very different from that of our common metal heat conduction and heat dissipation materials, the LED chip cannot be directly welded to avoid high and low temperature thermal stress damaging the chip of LED display.6. The heat conduction tube is used for heat dissipation, and the heat is guided from the LED display chip to the shell heat dissipation fin by using the heat conduction tube technology.7. The thermal conductive plastic shell is filled with thermal conductive materials during injection molding of the plastic shell, so as to increase the thermal conductivity and heat dissipation capacity of the plastic shell.It can be seen that the maturity and progress of LED display heat dissipation technology will be conducive to its concept of saving and environmental protection. LED electronic display manufacturers have a variety of methods to improve the heat dissipation of LED display in the production of LED display. There will be different considerations according to the power and place of use.
Siemens Mp370 Touch Screen Replacement Experience
Siemens Mp370 Touch Screen Replacement Experience
In the afternoon of October 3, 2015, I received a phone call from the company's workshop saying that the paste making touch screen was black and could not be operated. Feel the scene, first use a multimeter to measure the power supply 24VDC, and confirm that the voltage of 23.7vdc is within the normal range. It is indeed the fault of the screen film, and the screen needs to be replaced.I arranged the workshop staff to go to the warehouse to find a mp370 screen with the same model but with a newer order number and version number to replace, install, connect, power on and prepare to download the program.I first found the last modified project file. The file version is winccflexible 2008 SP2. My laptop is already winccflexiable2008sp4. Opening the project file normally only prompts that it needs to be upgraded. Back up the old project file, and then select Yes to open the project file normally. Check each page respectively to confirm that it is consistent with the screen of on-site work.According to previous experience, first enter the touch screen control panel, check the s7transfer page setting parameters, select remote control, set the Ethernet IP address and return to the transmission state; Then adjust my notebook IP address to ensure that IP is different from the network segment, and Ping touchscreen IP address to ensure smooth lines.Select the project file, select menu transmission, check overwrite user management, check IP parameters, click download, the software compilation is completed and the download starts. After waiting about 20 seconds, a prompt "unable to connect the device, please check the line or parameter settings" pops up. This pop-up message does need to be checked if there are no previous preparations, but I don't need to check it now because it has been confirmed that the communication is normal and the device cannot be connected. It is estimated that the OS version is too different from the software in the computer.Select the project file, select OS update, and then a page will pop up to display the two connected computers. There is a lightning symbol on the middle connection, which is constantly moving back and forth. The text above indicates that it is "connecting". After a few seconds, it indicates that it is connected. Then the middle connection bulges a small packet and moves back and forth, and the text above indicates that it is "transmitting... *. Img"; At this time, look at the touch screen and start displaying file names one after another, indicating that OS system files are being updated at this time.After waiting for about ten minutes, the touch screen will restart automatically. After restarting, it will automatically enter the transmission page. At this time, the project file should be able to be downloaded. Select the project file, then select menu transmission, repeat the above transmission operation, and the same transmission page of OS update will pop up. Two computers have a connection, and the lightning in the middle will string back and forth for several times, and it will become a small drum bag and start transmitting the project file. After about 10 seconds, the project transmission is completed, and the touch screen will automatically enter the operation page.Click to open the page and find that the page display and operation are basically normal, that is, click the button and enter the text box, not on time, but oblique, indicating that the new screen needs to be corrected, and then start the fantasy journey of correcting the screen.
For the Size of LED Display Screen, Can Its Size Be Enlarged at Will
For the Size of LED Display Screen, Can Its Size Be Enlarged at Will
The LED display box has self-determined size, high structural strength, good flatness and easy splicing. Generally speaking, the size of Maipu Guangcai LED electronic screen will not be limited. So, can the size of LED electronic display really be enlarged at will? In fact, it can not be tolerated. We can explain it from the following aspects.01. Price and cost of LED displayAs for the price of electronic screen, the price of LED screen was maintained at 351 square meters several years ago. With the more extensive use in the past two years, the price is now almost maintained at 7000 or 8000 per square meter. Of course, this includes its steel structure, accessories, control card, computer, and so on! Generally speaking, it can be infinitely enlarged, but because of this price, most users can't afford it.02. Visual viewing effectThe farther the display is viewed, the larger the screen must be. Similarly, the closer the viewing distance, the smaller the screen must be. For example: our common indoor LED display screen, under normal circumstances, the viewing distance is a few meters. If it is far, it is at most 20 or 30 meters. Therefore, the area of indoor screen will not be too large, and most of them will be kept within 60 square meters. For the LED outdoor display screen, the viewing distance will be relatively far, generally from more than ten meters, so the area of Maipu brilliant display screen will be relatively large, usually within 10-100 square meters.03. Installation location and environmentThere is no doubt that the indoor environmental space location is relatively limited. For those outside the room, if there is not enough space and position to support, any screen of the display screen will be subject to relatively large nature, so the screen can be enlarged at will here.04. After sales serviceOf course, there is also a major problem that can not be ignored, that is, when the Maipu brilliant LED electronic display is enlarged at will, the after-sales service will become more and more difficult. Once a problem occurs, the relevant maintenance and troubleshooting is quite troublesome, which is a huge test in terms of manpower, money and time.fqj
Ten Common Faults and Solutions of LED Display Screen
Ten Common Faults and Solutions of LED Display Screen
1. The display screen does not work and the green light of the sending card flashes (made into retractable type)Fault cause: the panel is not powered; The network cable is not connected properly; The receiving card has no power supply or the power supply voltage is too low; The sending card is broken; The signal transmission intermediate equipment is connected or faulty (e.g. function card, optical fiber transceiver).Troubleshooting: check and confirm that the power supply of the panel is normal; Check and reconnect the network cable; Ensure that the DC output power supply of the power supply is 5-5.2v; Replace the sending card; Check the connection or replace the function card (optical transceiver).2. The display screen does not work and the green light of the sending card does not flashFault cause: DVI or HDMI cable is not connected properly; The copy or expansion mode is not set in the graphics card control panel; The software chooses to turn off the power supply of the large screen; The sending card is not inserted in place or there is a problem with the sending card.Troubleshooting: check DVI cable connector; Reset the copy mode; The software selects to turn on the large screen power supply; Reinsert the sending card or replace the sending card.3. Prompt "large screen system not found" at startupFault cause: the serial port cable or USB cable is not connected with the sending card; Computer com or USB port is broken; The serial port cable or USB cable is broken; The sending card is broken; USB driver is not installed.Troubleshooting: confirm and connect the serial port cable; Replace the computer; Replace the serial port cable; Replace the sending card; Install new software or separate USB driver.4. Long strips of the same height as the lamp board are not displayed or partially not displayed or lack colorFault cause: poor contact or disconnection of flat cable or DVI cable (applicable to submarine Series); There is a problem with the former output or the latter input of the display light panel at the junction.Troubleshooting: reinsert or replace the cable; First determine which display module is faulty, and then replace it for maintenance.5. Some modules (3-6) are not displayedFault cause: power protection or damage; Poor contact of AC power line.Troubleshooting: check and confirm that the power supply is normal; Reconnect the power cord.6. The whole box is not displayedFault cause: 220V power supply line is not connected properly; There is a problem with network cable transmission; The receiving card is damaged; The hub board is inserted incorrectly.Troubleshooting: check the power supply line; Confirm to replace the network cable; Replace the receiving card; Reinsert the hub.7. Full screen flower point, picture shadow button movementFault cause: incorrect driver loader; The network cable of computer and screen is too long or of poor quality; The sending card is broken.Troubleshooting: reload the receiving card file; Reduce the length of network cable or replace it; Replace the sending card.8. The entire display screen displays the same content for each display unitFault cause: the display connection file was not sent.Troubleshooting: reset the screen file sending, and plug the network cable connected to the computer into the output port of the sending card near the indicator light when sending.9. The brightness of the display screen is very low and the displayed image is blurredFault cause: error in sending card program; The function card is not set correctly.Troubleshooting: restore the default setting of the sending card and save it; Set the minimum brightness value of display monitoring to more than 80.10. Shaking or ghosting of the whole screenFault cause: check the communication line between the computer and the large screen; Check the DVI line between the multimedia card and the sending card; The sending card is broken.Troubleshooting: reinsert or replace the communication line; Punch the DVI line for reinforcement; Replace the sending card.
Process Analysis of LED Video Processor Processing the Display Effect of LED Display Screen
Process Analysis of LED Video Processor Processing the Display Effect of LED Display Screen
Video processor is the witness and landmark equipment for the birth, growth and maturity of full-color LED display. Today, led special video processing equipment is also gradually maturing in this process. The quality of LED video processor directly affects the display effect of LED display.In general, LED video processor is a special video processor for LED. The task it needs to complete, in short, is to convert the image signal from the outside (such as Blu ray DVD, computer, HD playback box, etc.) into the signal acceptable to the LED display screen. In this process, the LED video processor generally needs to complete the following processing processes:1 Resolution specification conversion: Generally speaking, the signal resolution provided by image signal sources (such as Blu ray DVD, computer, HD playback box, etc.) has fixed specifications (refer to VESA, ITU, SMPTE and other standards), while the modular splicing display of LED display makes its resolution almost arbitrary. The video processor converts various signal resolutions into the actual physical display resolution of LED display screen.2 Color space conversion: the color gamut of LED display is very wide, while the color space of most image signals is relatively small (such as NTSC). In order to make the LED display have excellent image display effect, color space conversion must be carried out.3 Bit depth improvement: at present, the gray level of LED display has been increased to 16 bits and 17 bits, but most of the input signal sources are only 8 bits. Therefore, following the arrival of the era of high-definition display, the application of 10 bit or even 12 bit processing technology in video processor has become a general trend.4 Zoom: in the process of resolution specification conversion, the image needs to be scaled. Whether the resolution is increased or decreased, the complete image can be displayed on the screen.
Apple Will Develop Display Screen and Develop the next Generation Microled on a Large Scale
Apple Will Develop Display Screen and Develop the next Generation Microled on a Large Scale
IPhone x is Apple's first mobile phone with OLED screen, and the screen of this mobile phone is provided by Apple's competitor Samsung, but this situation may change in the future.San Francisco - March 19, according to a reporter's report, Apple will independently design and produce its device display for the first time, and use the secret facilities near the California headquarters to produce a small number of screens for testing purposes.Apple hopes on the microled screen, which is different from OLED. The luminous compounds it uses are expected to make future devices thinner, clearer and more energy-saving. Apple is currently investing in the development of the next generation of microled displays.However, the production of microled screen is much more difficult than OLED. People familiar with the matter said that Apple almost gave up the project about a year ago, but the engineers made progress later, and the project was further developed. However, consumers may have to wait a few more years to see the research and development results.People familiar with the matter said that the scale of Apple's California factory can not meet the requirements of mass production, but the company hopes to prevent partners from obtaining this technology in the short term, and keep everything confidential in the development stage.The screen suppliers of iPhone come from manufacturers such as Samsung, Japan display and LG display. Apple's independent research and development of display components may turn these partners into competitors. However, mastering microled technology will also make apple stand out in the increasingly mature smartphone market.These insiders, who asked to remain anonymous because of the discussion of internal planning, said Apple was investing heavily in the development of the next generation of microled displays. The light-emitting compounds used by microleds are different from the current OLED displays, which is expected to make future devices thinner, clearer and more energy-saving.People familiar with the matter said that the production difficulty of this screen is much higher than the OLED display currently used. The company almost gave up the project about a year ago, but engineers made progress later. The technology has entered the later stage, but consumers may need to wait a few more years to see the results.This ambitious undertaking is the latest example of Apple's internalization of key component design. For several years, Apple has been independently developing chips to power mobile devices. In the long run, the R & D of display may hurt a series of current suppliers, such as display manufacturers Samsung, Japan display, sharp and LG display, and human-computer interface solution provider Synaptics. It could also hurt universal display Corp., a leading OLED technology developer.Mastering microled technology will help Apple stand out in the increasingly mature smartphone market and surpass rivals such as Samsung, which claims to have an excellent display screen. Ray soneira, who runs display mate technologies, a screen testing company, said that internal screen design was a "golden opportunity" for apple. "Everyone can buy an OLED or LCD screen," he said. "But apple can have microleds."None of this is easy. Mass production of new screens requires new production equipment. By the time this technology is ready, there may be other alternative technologies. Apple may encounter insurmountable obstacles and abandon or postpone the project. In addition, the investment in this project is also very high.Eventually, Apple may outsource the production of the new screen to minimize the risk of production chaos to its profits. A person familiar with the matter said that the scale of the California plant could not meet the mass production requirements, but the company would hope to prevent partners from obtaining the patented technology for as long as possible. "We invested a lot of money in the factory," the person said. "The scale of the factory is large enough to complete the engineering design. In the development stage, we should keep everything confidential."
What Is an OLED Display? This Article Teaches You to Understand the Difference Between LED Backlight
What Is an OLED Display? This Article Teaches You to Understand the Difference Between LED Backlight
LED backlight refers to the use of LED (light emitting diode) as the backlight of LCD, while LED backlight display is only the backlight source of LCD, which is transferred from traditional CCFL cold light tube (similar to fluorescent lamp) to LED (light emitting diode). The imaging principle of liquid crystal can be simply understood as that when the external voltage is applied to deflect the liquid crystal molecules, it will block the transmittance of the light emitted by the backlight like a gate, and then project the light into the color filters of different colors to form an image.The transition of backlight module from CCFL to LED can bring many benefits, which can make the brightness of the display screen more uniform, the product power consumption is lower, and the shape can be lighter and fashionable. However, w-led (white LED) backlight is widely used in the market. In fact, this backlight only replaces the luminous components, and the improvement of display effect is very weak or even not improved. Rgb-led (three color LED), which has significantly improved the display effect of LCD products, has significantly improved the display effect, but at the same time, the production cost is high, so it is applied to high-priced LCD TVs. At present, the LED display mentioned by businessmen refers to the display products with white LED backlight. The difference between it and ordinary LCD is the change of backlight.LED display screen integrates microelectronics technology, computer technology and information processing. It has become the most advantageous public display media with its advantages of bright color, wide dynamic range, high brightness, long service life, stable and reliable operation. At present, LED display screen has been widely used in large squares, commercial advertisements, stadiums, information dissemination, news release, securities trading, etc, It can meet the needs of different environments.LED display is a display mode by controlling semiconductor light-emitting diodes. Its general appearance is composed of many usually red light-emitting diodes, which display characters by turning on and off the lights. A display screen used to display text, graphics, images, animation, market, video, video signals and other information.OLED display is considered as the emerging application technology of the next generation of flat panel display because of its excellent characteristics such as self illumination, no backlight, high contrast, thin thickness, wide viewing angle, fast response speed, flexible panel, wide temperature range, simple structure and process.OLED is the abbreviation of organic light emitting diode, which is translated as organic light emitting diode or organic light emitting display. In fact, this luminescence principle was discovered as early as 1936, but it was not until Kodak launched OLED double-layer device in 1987 that OLED attracted people's attention as a commercializable and excellent flat panel display technology. At present, more than 100 research units and enterprises around the world have invested in the R & D and production of OLEDs, including display giants in the current market, such as Samsung, LG, Philips, Sony and so on. On the whole, the industrialization of OLED has begun, in which monochrome, multicolor and color devices have reached the level of mass production, and large-size full-color devices are still in the research and development stage, but the production capacity is still low.Many netizens are easy to associate OLED with the LED backlight hyped by current manufacturers. In fact, OLED and LED backlight are completely different display technologies. OLED emits light by driving the organic film itself through current. The light can be monochrome such as red, green, blue and white, and can also achieve full-color effect. Therefore, OLED is a new luminous principle different from CRT, led and liquid crystal technology.The LED display screen is composed of LED dot matrix and ledpc panel. The text, picture, animation and video can be displayed by turning on and off the red, blue, white and green LED lights. The content can be changed at any time. All components are display devices with modular structure. The traditional LED display screen is usually composed of display module, control system and power supply system. The display module is composed of a dot matrix composed of LED lamps, which is responsible for luminous display; By controlling the lighting of the corresponding area, the control system can make the screen display text, pictures, videos and other contents. Monochrome and two-color screens are mainly used to play text. The full-color LED display can not only play text, pictures, animation, but also play video and other formats.At present, it is widely used in every corner of the world because of its wide audience area, simple operation, long service life, energy conservation and environmental protection. In general, LED display, LED backlight and OLED are three completely different imaging technologies.
no data
Contact US

    Bao’an District  Shenzhen City, China

     +86 189 3806 5764

NEWSLETTER SUBSCRIBE
no data
Copyright © 2021 CrowBerry

   

chat online
NEED HELP? WE'RE HERE!